Operation Manual

- 42 -
lected window is heard and all menu func-
tions are only valid for this window. All the
buttons (except stand-by and " +" / "-
") on the remote control and the TV are only
active for this window.
Press “M” button to exit layout menu.
picture menu
By pressing “ ” / “ ” button, select the sec-
ond icon. Picture menu appears on the
screen.
down for picture settings for current window
brightness
contrast
sharpness
color
picture
4
36
43
61
brightness
By pressing “ ” / “ ” button, select bright-
ness. “right/left to adjust brightness” is
seen on the screen. Press “ ” button to in-
crease brightness. Press “ ” button to de-
crease brightness. Brightness level can be
adjusted between 0 and 100.
contrast
By pressing “ ” / “ ” button, select con-
trast. “right/left to adjust contrast” is seen
on the screen. Press “ ” button to increase
contrast. Press “ ” button to decrease con-
trast. Contrast level can be adjusted be-
tween 0 and 100.
sharpness
By pressing “ ” / “ ” button, select sharp-
ness. “right/left to change sharpness” is
seen on the screen. Press “ ” button to in-
crease sharpness. Press “ ” button to de-
crease sharpness. Sharpness level can be
adjusted between 0 and 8.
color
By pressing “ ” / “ ” button, select color.
“right/left to adjust color” is seen on the
screen. Press “ ” button to increase color.
Press “ ” button to decrease color. Color
level can be adjusted between 0 and 100.
tint
This item is displayed in picture menu when
TV is in AV mode and at NTSC signal. By
pressing “ ” / “ ” button, select tint. "right/
left to adjust tint" is seen on the screen.
Press “ ” button to increase tint. Press “ ”
button to decrease tint. Tint level can be ad-
justed between 0 and 100.
down for picture settings for current window
brightness
contrast
sharpness
color
tint
picture
4
36
43
61
50
When TV is in AV mode; picture menu items
(brightness, contrast, sharpness and color)
may require re-adjustment.
When VGA Or DVI Is Connected To
TV:
down for picture settings for current window
brightness
contrast
phase
picture
50
36
61
(optional)
brightness
By pressing “ ” / “ ” button, select bright-
ness. "right/left to adjust brightness" is
seen on the screen. Press “ ” button to in-
02-ENG-32700-1546 UK-32 INCH TFT-(AU-V4G5)(10 PAGE)(HD-READY)(NEW)-50081920.p65 11.05.2006, 16:0542