Operation Manual

- 40 -
In source menu, highlight a source by
pressing
a
/
b
button and switch to that
mode by pressing
_
/
`
or OKbutton.
Other Features
TV Status
Programme Number, Programme Name,
Sound Indicator and Zoom Mode are dis-
played on the upper right side of the screen
when a new programme is entered,
/
PP button is pressed.
Mute Indicator
It is placed in the upper left side of the
screen when enabled.
To cancel mute, there are two alternatives;
the first one is pressing the
button and
the second one is increasing/decreasing
the volume level.
PIP and PAP modes
Press the button to switch to PIP mode.
At PIP Mode, a small picture (PIP picture) is
displayed on the main picture. There are 1
size and 4 positions (upper left, upper right,
bottom left and bottom right) available for the
PIP window. You can use
button to
change the PIP position. Aspect Ratio of the
PIP window is fixed and 4:3.
When PIP Mode is entered, the default active
window is PIP window and the active win-
dow is indicated by a white frame around it.
The active window can be changed by
pressing
_
/
`
button. The status info OSD
belongs to active window. The place of the
status OSDs are same for both windows.
Press the
button again to exit the PIP
mode.
Press the
button to switch to PAP mode.
At PAP Mode, two pictures with equal sizes
are displayed on the screen. Aspect Ratios
of the windows are fixed.
When you switch to PAP Mode, Main window
in PIP Mode is displayed on the right side of
the screen. The active window can be
changed by pressing
_
/
`
button.
Press the button again to exit the PAP
mode.
Source restrictions of PAP Mode are same
as in PIP Mode. It is not possible to show 2
different channels from the Monitor tuner at
the same time.
Freeze Picture
You can freeze the picture on the screen by
pressing the OK button. At PIP and PAP lay-
outs; only the main picture can be frozen.
Zoom Modes
Zoom mode can be changed by pressing
the WIDE button. You can change the screen
size according to the picture aspect ratio.
Select the optimum one from the following
ZOOM modes.
Auto:
When a WSS (Wide Screen Signalling) sig-
nal, which shows the aspect ratio of the pic-
ture, is included in the broadcast signal or
the signal from an external device, the TV
automatically changes the ZOOM mode ac-
cording to the WSS signal.
 When the AUTO mode does not function cor-
rectly due to poor WSS signal quality or
when you want to change the ZOOM mode,
change to another ZOOM mode manually.
Full:
This uniformly stretches the left and right
sides of a normal picture (4:3 aspect ratio)
to fill the wide TV screen.
 For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect
ratio), use the Full mode to restore the pic-
ture to its original shape.
02-ENG-3208-1072 UK-32 INCH 17MB15 OEM-(WO VGA)(ECO PIP)(S)-50089995.p65 15.11.2006, 10:3740