Operation Manual

- 38 -
Install menu
By pressing
_
/
`
button, select the fourth
icon. Install menu appears on the screen.
Program
By pressing
a
/
b
button, select Program.
Press
_
/
`
button to select the program
number. You can also enter a number via
digit buttons on the remote control. There
are 100 program storage between 0 and 99.
Band
Band can be selected either C or S by
pressing
_
/
`
button.
Channel
Channel can be changed by
_
/
`
button or
Digit Buttons.
Colour System
By pressing
a
/
b
button, select Colour
System. Press
_
/
`
button to change the
colour system to PAL, SECAM, PAL60 or
AUTO.
If Sound System is set to I, SECAM is not
available for the Colour System.
Note: In EXT mode, you can choose NTSC
3.58 and NTSC 4.43 as well.
Sound System
By pressing
a
/
b
button, select Sound
System. Press
_
/
`
button to change the
sound system to BG, DK, I, L or LP.
Fine Tune
By pressing
a
/
b
button, select Fine Tune.
Press
_
/
`
button to adjust the tuning.
Search
By pressing
a
/
b
button, select Search.
Press
_
/
`
button to start program search-
ing. The searching will stop when a signal
is found. You can also enter a frequency
value directly by pressing the digit buttons.
VCR (Video Cassette Recorder)
 This item can be seen in all modes except
EXT-3 and EXT-5.
 If you want to watch a VCR source from one
of these modes, then it will be better to set
VCR mode on. For this, while the cursor is
on this item press the
_
/
`
buttons to set it
On.
 If you want to watch a DVD , then you must
set this item Off.
Store Program
By pressing
a
/
b
button, select Store Pro-
gram. Press
_
/
`
or OK button to store the
adjustments. Program Stored will be dis-
played on the screen.
Program menu
By pressing
_
/
`
button, select the fifth icon.
Program menu appears on the screen.
02-ENG-3208-1072 UK-32 INCH 17MB15 OEM-(WO VGA)(ECO PIP)(S)-50089995.p65 15.11.2006, 10:3738