User's Guide

03
Connecting the Remote
Connecting the Nunchuk
1.Wii Nunchuk is suitable for use with the Wii Remote on the Wii console. Con-
nect the Nunchuk to the External Extension Connector on the Wii Remote
and then it communicates with the console. You can use both right and left
hands to play games simultaneously, which increases the fun of the game.
2. After connecting the Wii Remote to the Wii console, insert the Nunchuk Plug
into the External Extension Connector of the Wii Remote. You can use Wii
1. Connect to the Wii Console
1) Connect the Wii console to the display device, press the Power button on
the Wii console to turn it on, and the console is booted into the main interface.
Search by pressing and releasing the red SYNC. button on the front of the
console;
2) Install the battery in the remote, press and release the red SYNC. button
near the battery slot on the back of the remote in order that the remote is
paired with the console. When searching, the 4 Player LEDs on the remote
will blink. After the remote is paired with the console, one of the LEDs will be
always on, indicating that the remote is successfully connected to the console.
3) Working channel indicator: Wii console supports up to 4 remotes at the same
time. 4 Player LEDs display the working channels respectively, including 1-4
channels.
Remarks: ① Recommended distance for using the cursor: 50cm--6m (visual
sensitivity change). ② Recommended distance for using the sound: >6m (without
obstacles)
4) Connect to the Wii U Console: Connect the Wii U console to the display
device, press the Power button on the Wii U console to turn it on, and the
console is booted into the main interface. Press the white SYNC. button on
the front of the console to search; Install the battery in the Wii remote, con-
nect the Nunchuk with the remote, and then press the red SYNC. Button
near the battery slot on the back of the remote in order that the remote is
paired with the Wii U console. When searching, the 4 Player LEDs will blink.
After the remote is paired with the console, one of the LEDs will be always
on, indicating that the remote is successfully connected to the console.
devices can be connected.
8. Provide a set of motors to offer an haptic feedback function;
9. Provide a set of power supply, use 2 AA batteries (1.5V*AA), supply power to
WIIMOTE; battery voltage can not exceed 3.0V.