User's Manual

5
Lock Products
Lock the product, the interface will be shut down, and the
product will enter sleep mode. This can avoid accidentally
touching the interface, but can also save battery power.
When not using the product, press the on / off button, the
product locked. Such as setting the lock screen time, then
the standby time to the rear of the product will
automatically lock screen.
Unlocking the product
Press the power button wake up the product. Press and
hold the middle of the screen with a finger slide to the right
of the screen lock icon to Unlocked.
Sends a document to the product
You can use a variety of documents to take with you. You
can also listen to music, or browse your most cherished
photos and videos collection.
1.Use the included USB cable to connect the product to the
computer.
2.Pull-down status bar appears when the USB is
connected, click to open the USB storage device, and then
click OK.
3.Computer will argue that this product removable disks.
Navigate to the removable disk, and then open the disk.
4.Copy the document to the memory card. After copying
the document, in accordance with the requirements of your
computer's operating system, uninstall the product, and
then in a safe exit.
5.Interrupt the connection between the product and the
6
computer.
Restore factory settings
You want to re-set this product? If you want the product to
someone else, or just want to start from scratch, you can
perform a factory reset of the product. You must be careful
to face this step because Resetting the product will erase
all data, including the previously downloaded and installed
any application. Resetting the product will be restored to
you first open the product's initial state.
Reset the product by setting
1.In the main menu, tap Settings> Backup & reset>
Restore factory settings.
2.Points to restore factory settings> Point Reset phone>
Point Clear All contents> phone will automatically shut
down and restart.
NFC settings
You want to scan the NFC card? Use the NFC card and
close to the backcover of Device.
Turn on the NFC function by setting
1.In the main menu, tap Settings> More> NFC .
2.Use the NFC card and close to the backcover of Device.