User's Manual

3
1 Start using this product
Install / Remove SIM / T-FLASH card
Install SIM / T-FLASH card:
1.First SIM / T-FLASH card cover unscrew five screws,
remove the SIM / T-FLASH card cover.
2.The SIM / T-FLASH card into the corresponding slot.
3.Installed SIM / T-FLASH card cover and tighten the five
screws.
Remove the SIM / T-FLASH Card:
1.First SIM / T-FLASH card cover unscrew five screws,
remove the SIM / T-FLASH
card cover.
2.The SIM / T-FLASH card drawn from the corresponding
slot.
Note:
This product has 8 waterproof. After installing the SIM /
T-FLASH card, be sure to tighten the screws on the battery
cover so; avoid waterproof function failure.
4
Dial
1.Standby mode, click on the interface dial icon to enter the
dial pad.
2.Click the icon to hide the dial pad dial pad interface, view
call logs in the contact's number, you can also click directly
on the dial pad interface inputs need to dial the phone
number.
3 Click the icon to make a call to allocate the call.
2 Basic functions
Startup and shutdown
z Turned off, long press [ON/OFF button] boot.
z Turned on, long press [ON/OFF button] lock screen,
long press the pop-up selection screen, select Shut Down
and click confirm the shutdown.
Enter the phone number directly
1.Standby mode, click on the screen to enter the dial pad dial
icon, click on the digital input phone number.
2.If you enter a wrong character, click on the delete icon to
delete the dial pad.
3.To end the call or cancel the call, click the icon to hang up
the phone hang up.