User's Manual

Flying Angel 3G Wireless Data Card
User Manual
8 Updated 03/2009
Chapter 2 Prepare the Flying Angel
2.1 Inserting the SIM Card and MicroSD Memory
Card
To use your Flying Angel 3G Wireless Data Card to connect to the Internet, you need a SIM
card from your wireless service provider. The SIM card contains account information
used by your wireless provider’s network to validate your access.
Optional: If you require extra storage capability to store files, photos, music and video
on the Flying Angel, you may insert a microSD memory card into the device to provide up
to 4GB of portable storage (card purchased separately from wireless service providers
and a variety of retailers). The device does not require a microSD memory card to
connect to the Internet.

To install your SIM card into the Flying Angel 3G Wireless Data Card, follow the
steps below:
1. If your SIM is attached to a larger card, detach the SIM and remove any fragments
stuck to it.
If you use a SIM card from a mobile phone, follow the manufacturer’s instructions to
open the phone’s cover and remove the SIM.
2. Open the back cover of the Flying Angel by sliding it downwards (as shown in figure
2-1).