User's Manual

Flying Angel 3G Wireless Data Card
User Manual
31 Updated 03/2009
6. Click [Finish]. The Connections (Dial-up) window will open with the name of
the new connections profile you just created in the List of available connections
(see figure 4.2-12).

Fig. 4.2-12
7. You may repeat the above Steps 1 through 6 to add as many Connection Profiles
as you need. You will require a separate, active account from a wireless service
provider for each connection profile you create.
Note: The preferred method to add a connection (see figure 4.2-8) is to click
[Create New Connection – HSPDA/UMTS/EDGE/GPRS (fast)]. The “Add a
connection” window also includes the following secondary connection options:
x Use a predefined connection. Includes a limited list of wireless
providers and their connection parameters, preloaded into the Connection
Manager software. (See figure Fig. 4.2-13)