User's Manual

Lighting Control

Note:

Please make sure the chosen light, wall or power switch’s digital ID

code is consistent with RC-09’s digital ID code.

1. Select the control Zone of or

2. Press device key from

to then release, red LED indicator will light up

and within 5 seconds, press

or to send command, red

LED indicator will blink once.

3. If user changed mind after select a set of device but want to control another

set of device, within 5 seconds of pressing the first set of device key, press

second device key from to and release, backlight will blink twice to

indicate the change of control, then press or to activate the

command.

Home Appliances Control

1. Select one of the home appliances device

2. Press active key then release to control the home appliance.