Installation Manual

Using the iDRAC6 Directory Service 181
Additional settings to test BindDN option
racadm config -g cfgldap -o cfgLdapBindDN "cn=
idrac_admin,ou=iDRAC_admins,ou=People,dc=common,dc=
com"
racadm config -g cfgldap -o cfgLdapBindPassword
password
NOTE: Configure iDRAC6 to use a Domain Name Server, which resolves the LDAP
server hostname that iDRAC6 is configured to use in the LDAP server address. The
hostname must match the "CN" or "Subject" in the LDAP server's certificate.
Frequently Asked Questions about Active
Directory
My Active Directory login failed. How can I troubleshoot the problem?
iDRAC6 provides a diagnostic tool from the Web-based interface. Log in as a
local user with administrator privilege from the Web-based interface. Click
iDRAC Settings
 Network/Security tab  Directory ServiceMicrosoft
Active Directory. Scroll to the bottom of the Active Directory Configuration
and Management page and click Test Setting s. Enter a test user name and
password, and click Start Test. iDRAC6 runs the tests step-by-step and
displays the result for each step. A detailed test result is also logged to help
you resolve any problems. Return to the Active Directory Configuration and
Management page. Scroll to the bottom of the page and click Configure
Active Directory to change your configuration and run the test again until the
test user passes the authorization step.