Specifications

Confidential Information
www.vlg.com.cn
VLG Communication has possession of proprietary information provided in this report and this
proprietary information shall be kept in strict confidence and not disclosed to any person or firm without
the prior written consent of VLG Communication Technology.
.
Page 6
6、无线充电 Wireless charging:
给此设备充电
Charging this device.
1 将充电器线缆的一端插入电源装置（QC 适配器）；
Plug one end of the charger cable into the Power device (QC adapter)
2 将电源装置插到交流电源插座上；
Plug the power supply into an AC power outlet
3 将线缆的另一端（TYPE-C）插入移动电源；
Insert the other end of the cable (TYPE-C) into the mobile power supply
充电完毕
Finish charging
断开电源装置与充电板的连接，然后从交流电源插座上拔出电源装置。
Disconnect the power device from the Charger board , then unplug the power device from the AC
outlet
给无线设备充电（本无线充电发射端符合
QI
标准）
Charge the wireless device (this wireless charging transmitter meets the QI standard)
1 确保充电板上无任何杂物。
Make sure there is no clutter on the charging board
2 将您的手机或其他兼容设备放在充电板上。直至手机或设备充满电。
Place your phone or other compatible device on the Charger board. Until the phone or
device is full of power.
充电板和手机变热属于正常现象，如果您在充电时使用手机 (例如流式播放音
乐)，充电板和手机可能变得更热。
Charging boards and cell phones are normal, and if you're charging with a mobile phone (such as
streaming music), the Charger Board and cell phone may become hotter.