Specifications

Confidential Information
www.vlg.com.cn
VLG Communication has possession of proprietary information provided in this report and this
proprietary information shall be kept in strict confidence and not disclosed to any person or firm without
the prior written consent of VLG Communication Technology.
.
Page 11
• 请勿在高温环境中存放设备。 高温会缩短设备的寿命，使塑料部件变形或
熔化。
Do not storage the item in high temperature place. High temperatures shorten the life of the
equipment, making the plastic parts deformed or melted.
• 请勿将设备存放在过冷的地方。 否则当设备温度升高至常温时，其内部会
形成潮气，这会毁坏电路。
Do not storage the item in a over-cold place. Otherwise, when the equipment temperature rises to
normal temperature, its interior will form moisture, which will destroy the circuit.
• 不要尝试打开设备。
Do not try to open the device.
• 未经认可的改装会损坏设备并违反无线电设备的有关规定。
Do not fix the item without safety protection.
• 请勿扔掷、敲打或振动设备。 粗暴地对待设备会毁坏内部电路板及结构。
Do not hit the item or heavily throw it on the ground. Or it can damage internal circuit boards and
structures of equipment by rough treatment.
• 必须使用清洁、干燥的软布清洁设备表面。
Clean and dry soft cloth must be used to clean the surface of the device
Tech21 UK Ltd
Syd's Quay, Eel Pie Island, London, TW1 3DY, England
This device complies with Part 18 of the FCC Rules.
NOTE: This equipment has been tested and found to comply with the limits for a wireless power
charger, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for