User's Manual

Size：
85x55mm
1
2
3
4
5
Type-C Input
Power Switch
Microphone
Center of Wireless
Charger
Aux input
6
6
Phone Stand
WIRELESS CHARGER W/
PORTABLE BLUETOOTH SPEAKER
Product Introduction
Package Contents
Product Features
Wireless speaker x1
Type-C Charging
Cable x 1pcs
User Manual x1
5.0
3W*2
20Hz-20KHz
≤1.0%
≥75dB
≤10m
12V/1.5A,9V/2A,5V/2A
15W Max.
86x102x112mm
Model:
Wireless Version:
Loudspeaker Output:
Frequency Response:
Distortion:
Signal-To-Noise:
Range:
Wireless charging input:
Wireless charging output:
Dimension:
Specification
Operating Instruction
1.Pairing with mobile phone
2.Charging wireless speaker
3.Wireless charging device (Optional)
Warning Tips
FAQs
1) Do not charge the speaker with other unsuitable power adaptors,
It may cause damage to the speaker. The speaker must be charged
properly by the given USB-C charging cable.
2) In order to avoid damage to your hearing and prolong the
speaker’s use-life, please do not listen to music for long time in high
volume environment.
3) When a fault occurs, please immediately turn off the power
switch, unplug the USB plug, prevent speaker and other
components damaged.
● Long press 2-3 seconds to turn on wireless speaker. You will hear a
short music sound.
● Turn on the bluetooth function of the mobile phone. Search for the
accessible Bluetooth devices and select name “TBT2701” from the
device list to pair, the mobile phone will show “TBT2701”, if the
phone is paired with wireless speaker, you will hear "dingdong"
sound to connect successfully.
● After the speaker is connected you can play your music and listen.
● Insert the USB-C charging cable to the speaker, insert the other end
to the power of the unit with included USB-C cable.
● Red blinking light means it is low on power. Red LED will light up
when charging. The Red LED light will go off when fully-charged.
Note: When the speaker’s voice is lower than normal or you hear a
warning tone, please charge the speaker.
● Insert the USB-C charging cable to the speaker, insert the other end
to the power of the unit with included USB-C cable.
● Put the phone on the wireless charging area and make sure the phone
is properly positioned for charging (most likely the center).
Note: make sure you phone is fit for the Qi standard receiving
equipment.
Thank you for choosing Phone Stand Wireless Speaker. This item
features a wireless phone charger with portable bluetooth speaker.
Please read the manual carefully.
1) Why is there no sound when the speaker is turned on?
A: Make sure that you have charged the battery fully for the first
time.Charging time is approx 3 hours.
2) Why is there no sound when playing the speaker?
A: Check the speaker is connected by you phone. If there is no
connection, please reconnect and make sure you have the phone
connected to the proper speaker.
3) How to recognize the Bluetooth speaker is fully charged?
A: When the speaker is being charged, and the red indicator is
automatically turned off, it is already fully charged.
4) Why is the phone not charging?
A: Make sure the positioning of the phone is correct on the charger
and that the power source is connected.
INSTRUSTION MANUAL
TBT2701
TBT2701