Installation & Assembly

3
Install the Fixture (Wood)
Cut a 2.635” (2.750” max.) x 7.750” (8.125” max.) hole
in the wood at the desired location.
Using the necessary 1/2” NPT conduit connection
locations, bring power to fixture housing in accordance
with local electrical code.
Secure the fixture housing using No. 6 flathead wood
screws through the front mounting screw holes.
Skip to SECTION 6.
Install the Fixture (Drywall)
Uninstall the pre-installed brackets by removing the
bracket screws and install the hanger bar brackets (sold
separately) onto the fixture housing.
Nail down the hanger bars into the joists and position
the fixture housing to the desired location.
Install drywall accordingly.
NO. 5 FLATHEAD
SCREWS
MOUNTING SCREW
HOLE
1/2” CONDUIT
CONNECTION
4B
2
1
2
3
4
3
3
5A
5B
5D
1
2
4
Using the necessary 1/2” NPT conduit connection
locations, bring power to fixture housing in accordance
with local electrical code.
3
4A
7.750”
2.635”
HANGER BAR BRACKET
BRACKET SCREW
2
2
2
2
1/2” CONDUIT
CONNECTION
5C
3