Installation Instructions

2
SAVE THESE INSTRUCTIONS!
1C
Connect the mounting plate ground wire to a suitable
ground in accordance with local electrical codes.
Connect the black fixture wire to the hot power line
wire with a wire nut.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Mount the fixture by sliding it back onto the mounting
plate and reinstalling the fixture screws (reversal of
figure 1A).
4
5
6
7
5
6
4
8
Slide a #8 screw through a washer, and screw it into an
anchor to secure the fixture base to the wall. Repeat for
the other anchor.
1D
11
SCREW
WASHER
ANCHOR
ANCHOR
1B
8
7
Mount the fixture by sliding it back onto the mounting
plate
If desired, reposition the fixture up or down, if vertical
or left or right, if horizontal; then reinstall the fixture
screws (reversal of figure 1A).
8