Installation Sheet

1E
Properly place all wires and wire nut connections into
the electrical box.
Hook the fixture to the mounting plate and swing the
bottom of the fixture toward the plate until it is flush
with the wall.
Tighten the set screw at the side of the fixture.
7
2
8
SET SCREW
ALLEN WRENCH
9
1D
Connect the fixture to a suitable ground in accordance
with local electrical codes.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
Connect the black fixture wire to the hot power line
wire with a wire nut.
4
5
6
4
5
6
9
CAUTION: ensure that the fixture is secure to the
1C
FIXTURE BASE
SHADE
Screw the shade securely into the fixture base.
3
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
847.410.4400
www.techlighting.com
© 2018 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company