Installation Guide

2
7
9
Verify that the fixture is level before continuing.
Line an anchor tip with the center of an anchor hole,
and push the anchor into the wall up to the threads.
Screw the anchor in the rest of the way with a Phillips-
head screwdriver.
Repeat for the other anchor hole.
8
10
11
Slide a #8 screw through a washer, and screw it into an
anchor to secure the fixture base to the wall. Repeat for
the other anchor.
1C
8
ANCHOR
9
1D
11
SCREW
WASHER
ANCHOR
11
1
Screw the lamp into the socket. A frosted glass lamp is
recommended.
2A
Install the Lamp and Shade
2
Gently slide the edges of the shade down the tracks in
the fixture base until it rests against the end of the tracks.
2B
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
1
SHADE
TRACK
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, IL 60077
847.410.4400
www.techlighting.com
© 2008 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company
Use Type T8 medium base lamp.MAX 75 Watt