Installation Guide

13
14
1G
Position the glass shade against the fixture housing.
Secure the glass shade by screwing the retaining ring
onto the lamp socket using the retaining ring tool.
Repeat for the other side.
GLASS SHADE
RETAINING
RING
SOCKET
FIXTURE HOUSING
NOTE: Use only the retaining ring tool to tighten or
loosen the retaining ring. Tightening or loosening
the retaining ring by any other method can result in
injury, or damage to the fixture.
12
13
12
RETAINING
RING TOOL
RETAINING
RING
3
1H
SOCKET
LAMP
Use MAX 120 Volt, 75 Watt A19
Medium Base Lamp, For Each Socket.
Screw the lamp completely into the socket, and repeat
for the other side.
15
15