Manualshelf

Installation Guide

ManualsBrandsTech Lighting ManualsWall SconcesTech Lighting Cube Geometric Shaped Frost Pressed Glass Wall Washer Sconce
1234
3
Replacing the Lamp
Pull out the lamp shield.
Pull out the old lamp.
Handle the new replacement lamp with a soft cloth to
prevent the natural oils on the fingertips from collecting
on the lamp. This will help extend the life of the lamp.
Push the lamp pins firmly all the way into the socket
holes.
Push the lamp shield onto the spring clip.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture by turning the wall switch off.
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
Use MAX 35 Watt, Bi-Pin Halogen Lamp.
SOCKET
LAMP
LAMP SHIELD
LAMP PINS
SPRING CLIP
LAMP
3A
3B
3C
3D
1
1
2
2
3
4
5
4
5