Specification Sheet

SPLICE BOX
Required for hardwire applications. A connection
port is located on each side to feed runs in
both directions. The 1" Jumper Connector can
be used to place the Splice Box next to the
Undercabinet Housing or a longer Jumper
Connector can be used to place the Splice Box
in a more convenient or remote location.
Includes Romex
3/8" conduit connector.
* for custom lengths, contact our factory
* requires jumper cable, to be ordered separately
JUMPER CONNECTORS
Can be used to link one Undercabinet Housing
to another or to a Splice Box. The maximum
wattage for a single run is 600 watts. Use Female
to Female Connector to create longer lengths or
contact us for custom lengths.
PLUG-IN WALL FEED
Can be used to plug one Undercabinet
Housing directly into an outlet.
UNILUME LED SLIMLINE AWARDS
Unilume LED Slimline Accessories
7400 Linder Avenue T 847.410.4400
Skokie, Illinois 60077 F 847.410.4500
www.techlighting.com
© 2013 Tech Lighting, L.L.C. All rights reserved. The “Tech Lighting” graphic is a registered trademark of Tech Lighting, L.L.C.
Tech Lighting reserves the right to change specifications for product improvements without notification.
700UCSB FINISH
B blacK
W white
3.9"
98 mm
.85"
22 mm
2.8"
71 mm
jumper
connection port
jumper
connection port
700UCJC LENGTH* COLOR
01 1"
03 3"
12 12"
24 24"
B blacK
W white
700UCPL LENGTH* COLOR
24 24"
72 72"
B blacK
W white
*
for custom lengths, contact our factory
700UCTC COLOR
B blacK
W white
“T” CONNECTOR
Used to join three male connectors together.
700UCFFC COLOR
B blacK
W white
FEMALE TO FEMALE CONNECTOR
Joins two Jumper Connectors together.