Manualshelf

Installation Guide

ManualsBrandsTech Lighting ManualsCeiling FixturesTech Lighting Trace 24" Glass Bowl Semi-Flush Suspension Ceiling Fixture
1234
2
3B
Place all wire and wire nut connections inside the
electrical box.
Align the canopy holes with the crossbar holes. Secure
the canopy in place by tightening the four screws with
the provided Allen wrench.
SCREW
ALLEN
WRENCH
4
5
1
2
3
Connect the fixture to a suitable ground in accordance
with local electrical codes.
Connect the black fixture wire to the hot power line wire
with a wire nut.
Connect the white fixture wire to the neutral power line
wire with a wire nut.
3A
2
3
1
Temporarily remove the canopy and half ball/upper stem
assembly by unscrewing it from the hub and pulling the
fixture wires through.
Feed the fixture wires through the optional extension
stem(s) and tighten completely to the threaded nipple
on the hub.
Feed the fixture wires through the canopy and half
ball/upper stem assembly and tighten completely to the
threaded nipple on the new extension stem.
Adjust the Fixture Height (Optional)
2A
EXTENSION STEM
THREADED NIPPLE
THREADED NIPPLE
HUB
HALF BALL/UPPER STEM
ASSEMBLY
CANOPY
1
2
3
Install the Fixture
NOTE: Additional length fixtures require the
installation of an extension stem.