Manualshelf

Installation Guide

ManualsBrandsTech Lighting ManualsCeiling FixturesTech Lighting Mulberry Small Round Desert Clay Fabric Shade Semi-Flush Mount Ceiling Fixture
1234
LAMP
SOCKET
Installing the Lamps & Glass Disk
3
2A
LAMP
SOCKET
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
Use Volt, Watt A19
(medium) base lamp with each socket.
MAX 120 75
1
1
Screw the lamps into the sockets.
1
2B
2C
CAP
GLASS DISK
CAP
4
BOTTOM OF THE
FABRIC SHADE
JAM NUT
NIPPLE
BUSHING
Loosen the knurled nut and adjust the nipple height so
the back of the cap is level with bottom of the shade.
Tighten the jam nut firmly against the bushing.
2
3
Remove the cap.
Place the glass disk onto the nipple and secure it against
the shade pegs with the cap.
4
5
NOTE: Do not over tighten the cap. Overtightening
may break the glass and result in injury.
NIPPLE
SHADE PEG