Installation Sheet

2
2C
4
5
Connect the fixture to a suitable ground in accordance
with local electrical codes.
Connect the fixture white wire to the neutral power line
wire with a wire nut.
Connect the fixture black wire to the hot power line
wire with a wire nut.
Properly place all wires and wire nut connections into
the electrical box.
Mount the fixture by sliding it back onto the mounting
plate and reinstalling the fixture screws (reversal of
figure 1A).
6
7
8
4
6
5
2B
#8-32 SCREW
MOUNTING
PLATE
ELECTRICAL
BOX
Mount the mounting plate to the electrical box using
the provided #8-32 screws.
3
Remove the canopy screws using the provided Allen
Wrench.
Remove the mounting plate from the canopy.
FIXTURE
SCREW
1
MOUNTING
PLATE
1
ALLEN
WRENCH
Install the Fixture
2A
2
1
Note: When wall mounting the fixture, to
prevent sagging, position the mounting plate so
the fixture screws align vertically