Manualshelf

Installation Sheet

ManualsBrandsTech Lighting ManualsPendantsTech Lighting Billow 1 Light Pendant with Hand-Blown Clear Glass Shade and 4 Inch Round Flush Canopy
1234
Install/Replace the Lamp
Gently the shade up to expose the socket.
Remove the lamp shield and the old lamp.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
Use 35 Watt, Bi-Pin Halogen Lamp.MAX
Handle the new replacement lamp with a soft cloth to
prevent the natural oils on the fingertips from collecting
on the lamp. This will help extend the life of the lamp.
Gently insert the new lamp into the socket.
Push the lamp shield onto the spring clip.
Slowly slide the shade down until it gently rest on the
socket.
1
2
3
4
5
6
2A
BI-PIN LAMP
LAMP SHIELD
2
2B
2D
5
SOCKET
4
2C
SHADE
6