Installation Guide

3
Replacing the Lamp
Lift the glass top off of the globe.
Loosen the knurled nut.
Tilt the socket assembly and line up the cut out portion
of the notched ring with the edge of the opening in the
globe. Rotate the socket assembly to get the notched
ring out of the globe.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
Pull out the old lamp.
Gently insert the new lamp into the socket.
Refer to section 2A, steps 1-4 to reassemble the fixture.
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
Use Bi-Pin Halogen Lamp.MAX 50 Watt
3A
1
3
3B
3C
4
GLASS TOP
KNURLED NUT
GLOBE
NOTCHED RING
3
5
2
1
2
5
6