Installation Guide

3
Replacing the Lamp
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
Place the glass disc onto the new MR16 lamp and push
the lamp pins all the way into the socket. Tighten the
bottom two set screws with the Allen wrench.
Use 50 Watt type MR16
Front Cover Halogen Lamp.
MAX
MR16 LAMP
SET SCREW
ALLEN
WRENCH
Hold the glass disk and lamp with one hand and loosen
the bottom two set screws with the
provided Allen wrench.
Remove the glass and MR16 lamp.
(Do Not Remove)
ALLEN
WRENCH
GLASS DISC
1
2
3
1
2
2A
2B
MR16 LAMP
3
GLASS DISK