Installation Sheet

3
Replacing the Lamp
Remove the diffuser by supporting the metal shade and
pulling down on the diffuser to separate it from the
metal shade.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
METAL SHADE
DIFFUSER
2A
1
1
For incandescent versions, use 50 WattMAX
Mr16 Front Cover Halogen lamp.
Remove the old lamp.
Push the new lamp pins completely into the socket.
Lower the metal shade back on top of the socket
assembly.
MR LAMP16
SOCKET
3
4
5
2C
3
4
5
For versions, use providedLED LEDMAX 8 Watt
MR16 Bi-Pin Lamp.
Move the fixture’s metal shade up to expose the socket.
METAL SHADE
SOCKET
MR LAMP16
2B
2
2
Install the diffuser by pushing it firmly into the bottom
of the metal shade.
METAL SHADE
DIFFUSER
2D
6
6