Manualshelf

Installation Sheet

ManualsBrandsTech Lighting ManualsWall SconcesTech Lighting ModernRail 36" Tall Integrated LED Wall Sconce with 24v Remote Transformer Ceiling Canopy and Frosted Opal Glass Orb Shades
1234
4
SAVE THESE INSTRUCTIONS!
7400 Linder Ave, Skokie, 60077IL
847.410.4400
www.techlighting.com
© 2018 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company
1
Separate the two halves of the module by unscrewing
them from one another.
2A
Install the Module and Shade
2
Install the two module halves onto the rail and secure in
place by screwing them together. Make sure to match
the polarity markings positive (+) and negative (-) on
the rail.
RAIL
MODULE
MODULE
2B
3
Install the shade by screwing it into the base. Do not
over-tighten. A maximum of 4 modules or 32W Max
can be installed per rail.
Repeat steps 1-3 for remaining modules.
4
MODULE
MODULE
2C
RAIL
MODULE
SHADE