Installation Sheet

1A
Install the Fixture
1
Remove all the canopy screws using the provided Allen Wrench.
Remove the mounting plate and driver from the canopy.
Secure the mounting plate to the electrical box with the #8-32 screws provided.
Feed the half ball/upper stem assembly through the top of the canopy.
Determine the desired height of the fixture using the provided stems and assemble them by screwing them together.
Feed the fixture wires through the stem assembly, then screw the stem assembly to the top of the fixture.
Feed the fixture wires through the stem and half ball assemblies, then screw the half ball/upper stem assembly to the stem
assembly.
Connect the blue driver wire to the blue fixture wire with a wire nut.
Connect the red driver wire to the red fixture wire with a wire nut.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white driver wires to the neutral power line wire with a wire nut.
Connect the black driver wires to the hot power line wire with a wire nut.
Neatly place the driver, all wires, and wire nut connections inside the canopy, align the canopy holes with the mounting plate
holes, and secure the canopy in place by tightening the Allen screws using the provided Allen Wrench.
2
3
4
5
6
7
8
9
10
11
2
12
13
N
H
ALLEN
SCREW
CANOPY
MOUNTING
PLATE
#8-32
SCREW
ALLEN
WRENCH
DRIVER
CANOPY
STEM ASSEMBLY
HALF BALL/
UPPER STEM
FIXTURE
5
6
7
5
4
blue