Installation Sheet

2
7400 Linder Ave, Skokie, IL 60077
847.410.4400
www.techlighting.com
© 2015 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company
SAVE THESE INSTRUCTIONS!
1F
13
Re-install the shade to the fixture base and secure it
with the four fixture screws using the provided Allen
wrench.
14
For wet location installation, caulk around the
mounting base with waterproof construction sealant.
1C
At the marked location, push the anchor in up to the
threads.
Screw the anchor the rest of the way in with a
screwdriver.
5
6
ANCHOR
5
6
6
6
1E
Properly place the wires and wire connections into the
electrical box.
Re-install the fixture base to the electrical box with the
two #8-32 screws.
Secure the fixture base to the anchors with the screws
and washers.
10
11
Connect the fixture to a suitable ground in accordance
with local electrical codes.
Connect the black driver wire to the hot power line wire
with a wire nut.
Connect the white driver wire to the neutral power line
wire with a wire nut.
8
7
1D
9
12
8
9
#8-32 SCREW
WASHER
SCREW
11
11
12
12
12
12
ALLEN
WRENCH
FIXTURE SCREW
13
SHADE
13
13
13
1G