Installation Sheet

2
Properly place the wires and wire connections into the
electrical box.
Secure the fixture base to the electrical box with 2 #8-
32 screws.
6
7
1C
#8-32 SCREW #8-32 SCREW
1D
8
9
ALLEN
WRENCH
FIXTURE SCREW
Align the screw holes on the shade to the holes in the
fixture base and re-install the shade to the fixture base.
Secure the shade to the fixture base with the two
fixture screws using the provided Allen wrench.
9
9
1E
10
For wet location installation, caulk around the
mounting base with waterproof construction sealant.
7400 Linder Ave, Skokie, IL 60077
847.410.4400
www.techlighting.com
© 2014 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.
A Generation Brands Company
SAVE THESE INSTRUCTIONS!