Manualshelf

Installation Guide

ManualsBrandsTech Lighting ManualsPendantsTech Lighting Halogen Low-Voltage Alina FreeJack Monopoint Pendant with White Hand-blown Venetian Teardrop Shaped Glass Shade
1234
3
Replacing the Lamp
Lift the glass shades up to expose the socket.
Remove the lamp shield and the old lamp.
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
Handle the new replacement lamp with a soft cloth to
prevent the natural oils on the fingertips from collecting
on the lamp. This will help extend the life of the lamp.
Gently insert the new lamp into the socket.
Push the lamp shield onto the spring clip.
Lower the glass shades onto the socket assembly.
BI-PIN LAMP
LAMP SHIELD
NOTE: Use only your fingers and a soft cloth to
replace the lamp.
Use Bi-Pin Halogen Lamp.MAX 50 Watt
2A
1
1
2B
2
2C
3
4
4
2D
5
6
2
5