Specification Sheet
DESCRIPTION
Telescopes from 9” to 25”
.
Pivots at head to direct beam 12 volt, MR16
lamp of up to 75 watts (not included). Chrome finish. See accessory for
maximum wattage usage.
INSTALLATION
Install a DisplayJack canopy or connector ports (sold separately) and
push the DJ-Telescopes arm’s into the canopy or ports. After the show,
pull out DJ-Telescope—the canopy or ports stay in place for next time with
no need for an electrician.
ACCESSORIES & OPTICAL CONTROLS
Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt
Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap
Louver Lens Holder, Taza Accessory
WEIGHT
0.19lb / 0.09kg
ORDERING INFORMATION
700DJTEL
FINISH
C
CHROME
©2011 Tech Lighting, L.L.C. All Rights Reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C.
Tech Lighting reserves the right to change specifications for product improvements without notification.
7400 Linder Avenue
Skokie, Illinois 60077
www.techlighting.com
T 847.410.4400
F 847.410.4500
700DJTEL ____
FIXTURE TYPE:
________________________________________________
JOB NAME:
________________________________________________
NOTES:
________________________________________________
________________________________________________
________________________________________________
DISPLAY & EXHIBIT
DJ-Telescope