Manualshelf

Installation Sheet

ManualsBrandsTech Lighting ManualsCeiling FixturesTech Lighting 1 Light LED ADA Compliant Flush Mount Ceiling Fixture from the Cirque Collection
1234
2
1D
#8-32 SCREW
7
7
MOUNTING
PLATE
#8-32 SCREW
Connect the black driver wire to the hot power line wire
with a wire nut.
Connect the white driver wire to the neutral power line
wire with a wire nut.
1C
4
5
4
5
DRIVER
Properly place the driver and wire connections into the
electrical box.
Secure the mounting plate to the electrical box with 2
#8-32 screws, leaving the red driver wires accessible.
Ground the mounting plate to a suitable ground in
accordance with local electrical codes.
6
NOTE: Install the mounting plate so that the studs
are parallel or perpendicular to the walls, this will
ensure that the fixture is oriented to the room.
7
8
8
1E
Feed the red transformer wires through the hole in the
center of the fixture.
Mount the fixture base to the ceiling by reinstalling it
onto the mounting plate and secure it tightly with the
knurled nuts.
9
10
10 10
9
1F
CONNECTOR
Completely install the neutral power line wire to the
negative terminal to make a connection.
Completely install the black driver wire to the positive
terminal to make a connection.
11
NOTE: Ensure that the wires have been properly
installed by gently tugging on the wire to ensure the
connection is firm.
12