Specification Sheet
DESCRIPTION
Designed with a special screw-on bracket to fit lightweight portable
booths. Leave two screws in or on top of the wall for quick mounting of the
keyhole bracket. Complete with plug-in transformer with in-line switch and
10’ cord. Specify 50 or 75 watts. 12 volt, MR16 lamp not included. See
accessory for maximum wattage usage.
INSTALLATION
Leave two screws in or on top of the wall for quick mounting of the keyhole
bracket. Complete with 12 volt, 75 watt plug-in transformer and 10' cord,
plugs into a standard outlet.
OTHER INFORMATION
CP Screw-On with 50 watt transformer: low-voltage, halogen MR16 lamp
up to 50 watts (not included). CP Screw-On with 75 watt transformer: low-
voltage, halogen MR16 lamp up to 75 watts (not included).
ACCESSORIES & OPTICAL CONTROLS
Backlight Shield, Barndoors, Cone Glass Shield, Flight Paper, Lil Egypt
Shade, Lil Wok Shade, Louver Lens Holder, Round Glass Shield, Snap
Louver Lens Holder, Taza Accessory
WEIGHT
1.55lb / 0.7kg
ORDERING INFORMATION
700CPSO
SHAPE OR SIZE
FINISH
-
50 WATT
7
75 WATT
B
BLACK
C
CHROME
©2011 Tech Lighting, L.L.C. All Rights Reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C.
Tech Lighting reserves the right to change specifications for product improvements without notification.
7400 Linder Avenue
Skokie, Illinois 60077
www.techlighting.com
T 847.410.4400
F 847.410.4500
700CPSO ____ ____
FIXTURE TYPE:
________________________________________________
JOB NAME:
________________________________________________
NOTES:
________________________________________________
________________________________________________
________________________________________________
DISPLAY & EXHIBIT
CP Screw-on