Installation Sheet

Installation Instructions for

920FMBELTERRA

Belterra Semi-Flush Mount

CEILING

1.0

700BLT30

1.1

CAUTION RISK OF FIRE-

This product must be installed in accordance with the

applicable installation code by a person familiar with

the construction and operation of the product and the

hazards involved.

Use minimum 90°C supply conductors.

SAVE THESE INSTRUCTIONS!

GP I :ENERAL RODUCT NFORMATION

This product is suitable for damp locations.

These fixtures are intended to be installed

utilizing NEC compliant junction boxes.

This product can be dimmed with most ELV or TRIAC

dimmers.

This instruction shows a typical installation.

Tech Lighting reserves the right to change specifications for product improvements without notification.

7400 Linder Ave., Skokie, IL 60077

T 847.410.4400 | F 847.410.4500

www.techlighting.com

PAGE 1
Installation Instructions for 920FMBELTERRA Belterra Semi-Flush Mount 700BLT30 1.0 1.1 CEILING GENERAL PRODUCT INFORMATION: CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. This product is suitable for damp locations. These fixtures are intended to be installed utilizing NEC compliant junction boxes. Use minimum 90°C supply conductors.
PAGE 2
Install the Fixture 1A 4 HALF BALL/ UPPER STEM CANOPY 7 SCREW COLLAR R E DRIV MOUNTING PLATE 13 12 11 14 ER DRIV 5 10 STEM ASSEMBLY 9 HALF BALL 5 FIXTURE CANOPY COLLAR NUT 6 MOUNTING PLATE SCREW COLLAR HALF BALL 8 15 DRIVER FINGER 1 Remove all the canopy screws using the provided Allen Wrench. 2 Remove the mounting plate from the canopy and remove the driver from the packaging. 3 Secure the mounting plate to the electrical box with the #8-32 screws provided.