Installation Sheet

2
2
1
With the provided Allen wrench, remove the Allen screws on the fixture base.
Remove the mounting plate from the fixture base
Connect the black/blue driver wire to the black/blue fixture wires with a wire nut.
Connect the red driver wire to the red fixture wires with a wire nut.
Connect the fixture to a suitable ground in accordance with local electrical codes.
Connect the white driver wire to the neutral power line with a wire nut.
Connect the black driver wire to the hot power line with a wire nut.
Properly place the driver, all wires, and wire nut connections into the junction box, then install the mounting
plate to the junction box with the two #8-32 screws provided.
Mount the fixture base onto the mounting plate and secure it in place by reinstalling the Allen screws using the
provided Allen wrench.
1A
Install the Fixture
4
3
6
5
7
DRIVER
9
8
7
6
ALLEN SCREW
JUNCTION BOX
MOUNTING PLATE
5
3
#8-32 SCREW
ALLEN WRENCH
4