Installation & Assembly

1
Installation Instructions for
Ceiling Canopy
980CKCD
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing
NEC compliant junction boxes.
This product is suitable for damp locations.
Preparing the Canopy
Remove the crossbar from the canopy by completely
unscrewing the strain relief.
STRAIN RELIEF
CROSSBAR
CANOPY
SET SCREW
Loosen the set screw on the strain relief.(Do Not Remove)
1A1A 1A1C
1
3
1.3
CKCD
#8-32
SCREW
CROSSBAR
Mount the crossbar assembly to the electrical box with
the two provided #8-32 screws.
1A1B
2
2 2
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.

Summary of content (4 pages)