Installation Instructions

Use 120 voltMAX 75 Watt
Type A19 Medium Base Lamp.
1
Installation Instructions for
Install the Lamp
SHADE
CAUTION: To reduce the risk of a burn or electric
shock during relamping, disconnect the power to
the fixture.
Reach inside the shade and screw the lamps into the
sockets.
For re-lamping, reverse sections 2 and 1.
GP I :ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
1.1
1A
1
1
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
2A
Install the Cage (for caged versions only)
SOCKET
LAMP
SHADE
CAGE
2
TRIM
Pendant
SAVETHESE INSTRUCTIONS!
If necessary, install the cage by inserting three balls
inside the trim of the shade, then apply force to the
remaining ball to snap it into place.