Installation Instructions

Leave 12" of the cord behind the canopy for power
connections. Cut the excess cord.
Strip the end of the wires.
1
2
3A
12"
Install the Fixture
MOUNTING
PLATE
ELECTRICAL BOX
3B
5
7
6
3
Connect the ground wire to a suitable ground in
accordance with local electrical codes.
Connect the black wires to the neutral power wire with
a wire nut.
Connect the red wires to the hot power wire with a wire
nut.
Neatly place all wires and wire nut connections in the
canopy and reinstall the canopy to the mounting plate
(reversal of step 1A).
4
5
6
Install the Lamps
1
Screw the lamps into the sockets.
C AUTION: To reduce the risk of a burn or electric
shock during re-lamping, disconnect the power to
the fixture.
Refer to fixture marking for lamp information.
4A
SOCKET
LAMP
3