Installation Instructions

1E
1D
Line up an anchors with the center of a backplate holes
and push the anchors in, up to the threads.
Screw the anchors the rest of the way in with a
screwdriver.
4
5
4
5
Secure the backplate to the anchors with screws and
washers.
6
6
6
HANG STRAIGHT
STEM
FIXTURE
SET SCREW
1
2A
Loosen the set screw on the hang straight using the
provided Allen wrench.
Determine desired length of fixture using the provided
stems and assemble them by screwing them together.
Feed the fixture wires through the stem assembly and
screw it to the fixture.
Feed the fixture wires through the hang straight and
screw it onto the stem assembly.
Re-tighten the set screw on the hang straight.
3
Assemble the Fixture
2
ALLEN
WRENCH
3
2
2
4
FIXTURE WIRES
4
5
NOTE: Complete next steps for each side of the
fixture.
2