Installation Instructions

1A
1
Install the Mounting Plate
Separate the mounting plate from the canopy by
removing all four mounting plate screws.
CANOPY
Remove the mounting plate from the canopy.
MOUNTING PLATE
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
GP I :ENERAL RODUCT NFORMATION
This fixture is intended to be installed utilizing
NEC compliant junction boxes.
This product is suitable for damp locations.
This product may be dimmed with a low-voltage electronic dimmer.
1.0
1
2
3
MOUNTING
PLATE SCREW
Temporarily install the mounting plate to the electrical
box with the two #8-32 screws provided.
Mark the four anchor locations and uninstall the
mounting plate.
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
1B
4
1C
MOUNTING
PLATE
#8-32 SCREW
#8-32 SCREW
4
3
3
5
At the marked locations, drill appropriate sized holes
and install the four anchors.
1D
MOUNTING
PLATE
5
5
5
5
Installation Instructions for
SU886_
Linear Suspension