LBL Lighting Track System Buying Guide

LED ILLUMINATED WALL MONORAIL SYSTEM

Step One: Choose your decorative elements

Choose finish of system and make sure all components are specified

as such.

Choose elements (Heads) from decorative elements (pp. 9-10).

Determine item numbers (pp. 138-167).

Specify one LED Illuminated Wall Monorail Element Adapter for each

element (p. 29).

Add up total lamp wattage on system (3 watts for each single

generator and 6 watts for each dual generator) to confirm wattage

does not exceed transformer capacity.

Step Two: Choose your rail

Measure the length of LED Illuminated Wall Monorail Run;

determine quantity and length of LED Illuminated Wall Monorail

sections required (p. 21).

Specify a length, in feet, of fiber optic cable equal to the run length

plus one additional foot (p. 21).

Step Three: Choose your LED generators

Use a single generator every 16'.

Use a dual generator for runs over 16' or to changed the LED color

mid-run (p. 21).

(BZ) Bronze or (SC) Satin Nickel

H ____________________ FSJ

RAILADAP-WALL ________ -LED

__________________ watts

RAIL-ST- ____________ 96-LED

FIBER OPTIC CABLE LENGTH ____FT

LEDMRLE__________________

LEDMRLC__________________

QTY. ITEM NUMBER

Page numbers below reference the LBL Lighting Full Line Catalog (921LBLFLCAT09)