LBL Lighting Track System Buying Guide

LED ILLUMINATED MONORAIL SYSTEM

Step One: Choose your decorative elements

Choose finish of system and make sure all components are specified

as such.

Choose elements (Pendants, Heads and Chandelier Heads) from

decorative elements (pp. 6-11).

Determine item numbers. Specify with an MR2 suffix. (pp. 68-173).

Add up total lamp wattage on system, 3 watts for each single

generator, and 6 watts for each dual generator, to confirm wattage

does not exceed transformer capacity.

Step Two: Choose your rail

Measure length of LED Illuminated Monorail run; determine quantity

and length of LED Illuminated Monorail sections required (p. 21).

Specify a length, in feet, of fiber optic cable equal to the run length,

plus one additional foot (p. 48).

For custom bent LED Illuminated Monorail, please provide the

degree and radius of each curve and/or a scaled drawing, by fax, to

the quotes department, 847-626-6325, for a quotation.

Step Three: Choose your LED generators

Use a single generator every 16'.

Use a dual generator for runs over 16' or to change the LED color

mid-run (p. 21).

(BZ) Bronze or (SC) Satin Nickel

H __________________ MR2

________________ watts

RAIL-ST- ____________ 96-LED

FIBER OPTIC CABLE LENGTH ____FT

LEDMRLE ____________________

LEDMRLC ____________________

QTY. ITEM NUMBER

Page numbers below reference the LBL Lighting Full Line Catalog (921LBLFLCAT09)