LBL Lighting Track System Buying Guide

18
Step Four: Choose your supports
Recommended every 3'.
Use Telescoping Rigid standoffs for curvy runs or if you want the
ability to fine-tune the drop from the ceiling without any cutting.
Add “-BJ” suffix for sloped ceiling mounting (p. 57).
Use Adjustable Cable Standoffs for a minimal appearance (p. 57).
Use Direct Feed Telescoping Rigid Standoffs with Direct Feed Surface
Transformers or Direct Power Feed Canopies for a close-to-ceiling
appearance (p. 57).
Step Five: Choose your transformer + canopy
Use a surface mounted transformer for installations over an existing
junction box where re-wiring is impractical. Choose magnetic or
electronic (p. 59).
Use a direct feed surface transformer for installations over an
existing junction box where re-wiring is impractical and for a
close-to-ceiling appearance. Choose magnetic or electronic (p. 59).
Use a remote transformer and power feed canopy for a minimal
appearance (pp. 60-61).
HANGER-ADJ ____________-2
HANGER-CBL- ____________-2
HANGERDIRADJ __________-2
TRANS-SF ________________-2
TRANSDIR-SF ____________-2
TRANS-RMTE- ____________-2
REMOTECNP ____________-2C
QTY. ITEM NUMBER
Page numbers below reference the LBL Lighting Full Line Catalog (921LBLFLCAT09)
2-CIRCUIT MONORAIL SYSTEM