LBL Lighting Track System Buying Guide

14
Step Four: Choose your supports
Recommended every 3'.
Use Telescoping Rigid standoffs for curvy runs or if you want the
ability to fine-tune the drop from the ceiling without any cutting.
Add “-BJ” suffix for sloped ceiling mounting or add “-WB” for
cantelievered wall mount (p. 42).
Use Adjustable Cable Standoffs for a minimal appearance (p. 42).
Use Direct Feed Telescoping Rigid Standoffs with Direct Feed Surface
Transformers or Direct Power Feed Canopies for a close-to-ceiling
appearance (p. 42).
Step Five: Choose your transformer + canopy*
Use a surface mounted transformer for installations over an existing
junction box where re-wiring is impractical. Choose magnetic or
electronic (pp. 43-44).
Use a direct feed surface transformer for installations over an
existing junction box where re-wiring is impractical and for a
close-to-ceiling appearance. Choose magnetic or electronic (p. 45).
Use a remote transformer and power feed canopy for a minimal
appearance. Choose magnetic or electronic (pp. 47-48).
*If using LED heads or pendants, be sure to choose a transformer that is
compatible with LED fixtures.
HANGER-ADJ ______________
HANGER-CBL ______________
HANGERDIRADJ ____________
TRANS-SF ________________
TRANSDIR-SF ______________
TRANS-RMTE ______________
REMOTECNP ______________
QTY. ITEM NUMBER
Page numbers below reference the LBL Lighting Full Line Catalog (921LBLFLCAT09)
MONORAIL SYSTEM