Instruction Manual

MAGNETIC AIR VENT MOUNT - SRO6156
Important Safety Information:
1. Do not place the mount on or over an airbag.
2. Do not place the mount in a position that obstructs the driver’s view of traffic.
3. Do not install the mount while driving.
This item is not designed to be used with wireless charging products. There is a chance
that the metal plate could heat up and cause burns and/or damage to your device.
Contents:
1 x Magnetic Air Vent Mount
1 x Rectangle Metal Plate
1 x Round Metal Plate
Metal Plate installation:
The metal plates can be attached to your device in multiple ways:
1. Directly to the device
2. Directly to device case
3. Behind the device case
4. Behind the battery cover (If your cover is detachable)
Positioning the metal plate at the bottom half of the device will be suitable for most devices
and not impact on the functionality.
Avoid placing the metal plate near the top of the device as this may affect functionality.
Installation instructions:
1. Place the mount onto your air vent.
2. Place your device with the metal plate attached onto the mount.
Metal Plate Removal:
If you need to remove the metal plate, place a thin plastic card in between the plate and the
surface of your device or case to lift the plate from your device.