User's Manual

Important Safety Information
This product is IPX4 water resistant so
it is designed to prevent perspiration
or water droplets from a ecting the
performance during proper use.
The earphones should not be
submerged in liquid or used in areas
with excessive moisture.
Avoid operating or storing the earphones
re, on stoves, or inside sealed cars
in hot weather. Exposing them t
re
may cause the earphones to generate
heat or ignite.
Pairing the Adapter
For best results, place the earphones
within 3 ft of your phone or tablet
during pairing.
Press and hold the key on the
earphone controller for about three
seconds, and then release it when the
red and blue lights blink alternately. The
earphones are now in pairing mode.
Enable the Bluetooth function of your
phone or tablet, search the Bluetooth
devices and select Wireless 9018 for
pairing and connection.
Controller Functions
On/o
: Press and hold the key for
3 seconds to turn on/o
.
Music or video pause: Press the key
to pause playback, and press the key again
to resume playback.
Volume increase: Click the key.
Volume decrease: Click the key.
• Next song: Press & hold the key.
Previous song: Press & hold the key.
Answer/hang up: During an incoming call,
press the key for two seconds and
then release it.
Please note, this controller uses the player
app’s available func
tions. The controller’s
functionality may vary depending on the
player app being used.
Package Contents
Wireless earphones
• Extr
cushions
Type C charge-in cable
• User manual
• Collar Clip
FCC ID: 2ADH6-1909018B
Please note: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
Charging the Wireless Earphones
Charge the wireless earphones by
connecting Type C charging cable to the
earphones’ charging port.
Plug the USB connector into a USB port on
any USB power adapter.
When charging, a red light on the adapter
will be illuminated. Once the light turn
blue, the adapter is fully charged. Battery is
fully charged in about 1.5 hours.