Owner’s manual Tech Force dot sights TF90 TF96
Specifications Tech Force TF96 red dot sight 3/8" to 11mm & Weaver mounts 17mm objective lens 3 MOA dot 7 brightness settings 5.60 oz. 4.125" long 2.38" mount length 2.125" high Tech Force TF90 red dot sight 3/8" to 11mm & Weaver mounts 28mm objective lens 3 MOA dot 7 brightness settings 25mm exit pupil 9 oz. 4.50" long 2.38" mount length 2.50" high Both dot sights use a CR2032 battery (not included). Mounts 3/8" to 11mm mount Weaver mount Your Tech Force dot sight includes 2 mounts.
Adjustments Unscrew small black caps on top & side Elevation adjustment Windage adjustment Once the protective black caps have been removed, you can adjust the elevation and windage. Insert either a coin or small flat-bladed screwdriver into the slot on top of the knob and turn. You will hear and feel noticeable clicks to make it easier to adjust and readjust your dot sight. Rheostat The rheostat is the large adjustment knob on top. Use it to adjust the brightness of the dot.
Battery To insert a battery, unscrew the top of the large knob using a coin or a flat-bladed screwdriver. Insert battery, reattach the knob cover. Warranty Your Tech Force dot sight is manufactured to the highest possible standards, using the finest materials to give a lifetime of service. In the unlikely event there are any defects in materials or workmanship in the first twelve (12) months after retail purchase, we will repair or replace the dot sight under warranty.
