USER MANUAL EU-WiFi RS 1
USER MANUAL TABLE OF CONTENTS I. Safety ...................................................................................................................... 3 II. Description ............................................................................................................ 4 III. How to install the module ........................................................................................ 4 IV. First start-up ...........................................................................
USER MANUAL I. SAFETY Before using the device for the first time the user should read the following regulations carefully. Not obeying the rules included in this manual may lead to personal injuries or controller damage. In order to avoid accidents and errors it should be ensured that every person using the device has familiarized themselves with the principle of operation as well as security functions of the controller.
USER MANUAL II. DESCRIPTION EU-WiFi RS is a device which enables the user to remotely control the operation of the system via the Internet. The possibilities of controlling the system depend on the type and software used in the main controller.
USER MANUAL IV. FIRST START-UP In order for the controller to work properly, follow these steps while starting it for the first time: 1. Connect EU-WiFi RS to the main controller using an RS cable. 2. Connect the power supply to the module. 3. Go to the module menu and select WiFi network selection. A list of available WiFi networks will appear - connect to one of the networks by entering the password. In order to enter the password, use the arrows and select the right characters.
USER MANUAL NOTE The generated code is valid only for 60 minutes. If you fail to register within this time, a new code must be generated. NOTE It is advisable to use such browsers as Mozilla Firefox or Google Chrome. NOTE Using one account at emodul.eu it is possible to control a few WiFi modules. 1. LOGGING IN TO THE APPLICATION OR WEBSITE After generating the code in the controller or module, go to the application or http://emodul.eu and create your own account.
USER MANUAL 2. HOME TAB Home tab displays the main screen with tiles illustrating the current status of particular heating system devices. Tap on the tile to adjust the operation parameters: A screenshot presenting an example Home tab with tiles The user can customize the the home page by changing the layout and order of the tiles or removing the ones which are not needed. These changes can be made in the Settings tab. 3.
USER MANUAL 4. STATISTICS TAB The Statistics tab enables the user to view the temperature charts for different time periods e.g. 24h, a week or a month. It is also possible to view the statistics for the previous months. Statistics tab VI. CONTROLLER FUNCTIONS BLOCK DIAGRAM - MODULE MENU Registration WiFi network selection Network configuration Screen settings Menu Language Factory settings Software update Service menu Software version 1.
USER MANUAL 2. WIFI NETWORK SELECTION This submenu offers a list of available networks. Select the network and confirm by pressing MENU. If the network is secured, it is necessary to enter the password. Use the arrows to select each character of the password and press MENU to move to the next character and confirm the password. 3. NETWORK CONFIGURATION Normally, the network is configured automatically.
USER MANUAL VII. TECHNICAL DATA No Specification 1 Supply voltage 2 Operating temperature 3 Maximum power consumption 4 Connection with the controller with RS communication 5 Transmission 5V DC 5°C - 50°C 2W RJ 12 connector IEEE 802.
USER MANUAL 11
USER MANUAL 12
